Volvo Fuel Injector 85020179 for MD13

Description

Volvo Fuel Injector 85020179 for MD13

Brand: Renault, Volvo

Engine Type: MD13

Type: EUI

OEM Part Numbers: 21812033, 21812071, 21977918, 22254576, 85002179, 85020179, 7485020179

Manufacturer Part No.: BEBE4P01001, BEBE4P01002, BEBE4P02001, BEBE4P03001, HRE403

Manufacturer: Delphi

Warranty: 24 months without mileage limitation.

Volvo Fuel Injector 85020179: Genuine OEM Replacement for MD13 Euro 6 Engines

Struggling with rough running, black smoke, reduced power, or increased DEF usage in your Euro 6 Volvo truck? The Volvo fuel injector 85020179 is the authentic OEM part engineered to deliver precise, high-pressure diesel injection and restore optimal performance in MD13 engines. Produced by Delphi (Delphi numbers BEBE4P03001, BEBE4P02001), this electronic unit injector supports clean combustion, better fuel efficiency, and full Euro 6 emissions compliance.

Perfect for heavy-haul FH, FM, and FMX models, the 85020179 helps eliminate misfires, excessive regens, and costly breakdowns—keeping your Volvo productive mile after mile.

What Is the Volvo Fuel Injector 85020179?

The Volvo 85020179 is a high-performance E3-series electronic unit injector (EUI) featuring advanced multi-stage injection technology. It meters fuel accurately at extreme pressures for superior atomization, lower NOx/particulate output, and smoother engine operation.

Common cross-references include 22254576, 85020180, 21914027, BEBE4P03002, 7422254576, and HRE403, verifying compatibility across Volvo updates and equivalents. This Delphi-built component is calibrated for long-term reliability in demanding truck applications.

Compatible Vehicles and Engines

The 85020179 Volvo fuel injector is specified for Euro 6 13-liter platforms, widely used in European and export markets.

Volvo Truck Models

• FH series (FH420, FH460, FH500, FH540)
• FM series (FM380, FM420, FM460, FM500)
• FMX series (FMX420, FMX460, FMX520)
• FH4, FM4, and FMX heavy-duty variants

Engine Applications

• Volvo MD13 (MD13LR Euro 6 configurations)
• D13K Euro 6 engines (D13K420, D13K460, etc.)
• Select Renault Trucks with compatible 13L diesels

Always match your engine code, emissions standard (Euro 6), and serial number. This injector suits Euro 6 setups and is not a direct fit for earlier EPA US models or D11/MP7 engines.

Key Features and Specifications

• Brand: Genuine Volvo / Delphi OEM
• Engine: MD13 / D13 Euro 6 13L diesel
• Type: Electronic unit injector (EUI) E3.27 or similar, multi-orifice nozzle
• Includes: Seals, O-rings, and installation hardware (core exchange often offered)
• Benefits: Enhanced fuel economy (3–5% potential gains), reduced smoke and noise, improved cold starts, extended aftertreatment durability

Replacing all six injectors as a set ensures even cylinder balance and prevents uneven wear.

Signs Your MD13 Euro 6 Needs New Fuel Injectors

Look out for these failure indicators:

• Rough idle or noticeable engine vibration
• Black exhaust smoke under acceleration
• Declining fuel mileage or higher DEF consumption
• Hard starting, especially in low temperatures
• Power loss during heavy loads or climbs
• Check engine lights with injector-related fault codes
• Frequent forced DPF regenerations

Ignoring symptoms risks injector sleeve damage, fuel dilution in oil, or major engine issues. Early replacement with Volvo 85020179 safeguards reliability.

Benefits of Genuine OEM Volvo Fuel Injector 85020179

Genuine Volvo/Delphi injectors provide exact factory calibration—no ECU adaptation problems common with aftermarket copies. Advantages include:

• Superior longevity in high-torque, Euro 6 conditions
• Perfect integration with engine management for emissions compliance
• Quieter, smoother performance with less vibration
• Lower risk of repeat failures
• Full dealer warranty and support

Many fleet operators experience fewer service intervals and consistent power after installing OEM sets.

Volvo MD13 Fuel Injector Replacement Guide

Professional installation is essential for high-pressure systems. Key steps:

1. Depressurize fuel and remove valve cover
2. Extract old injectors; replace injector sleeves/cups (strongly recommended)
3. Clean bores and lubricate new O-rings with clean diesel
4. Install injectors, torque in sequence to manufacturer specs
5. Program trim/correction codes using Volvo diagnostic tools
6. Prime system, bleed air, and check for leaks
7. Perform contribution test and verify on-road performance

New sleeves prevent coolant intrusion—a common Euro 6 MD13 concern.

Where to Buy Volvo Fuel Injector 85020179

Buy from authorized Volvo dealers, certified truck parts suppliers, or trusted online sources with core-return options. Verify genuine markings to avoid counterfeits that compromise performance and emissions.

Conclusion: Restore Euro 6 Performance with 85020179

The Volvo fuel injector 85020179 delivers OEM precision for your MD13 Euro 6 engine. Whether addressing one failing injector or refreshing the full set, this Delphi genuine part ensures reliable power, better economy, and minimized downtime.

Additional Information