Volvo Fuel Injector 85013160 for MD13 US 10

Description

Volvo Fuel Injector 85013160 for MD13 US 10

Brand: Mack, Renault, Volvo

Engine Type: MD13 US 10

Type: EUI

OEM Part Numbers: 21092434, 21458369, 85003658, 85013160

Manufacturer Part No.: BEBE4G02001

Manufacturer: Delphi

Warranty: 24 months without mileage limitation.

Volvo Fuel Injector 85013160: Genuine Delphi EUI Injector for Volvo D13, D16 & Mack MP7, MP8 Engines

The Volvo Fuel Injector 85013160 is an authentic OEM electronic unit injector (EUI) from Delphi, engineered for heavy-duty Volvo and Mack diesel engines. Cross-referenced with numbers like 21458369, 85003658, 22027808, 21092434, 85013160, and equivalents such as BEBE4G12001 or reman EX series, this injector delivers precise, timed fuel injection for optimal combustion in US07/US10 and similar emissions packages.

Trusted in commercial trucking, the Volvo Fuel Injector 85013160 restores horsepower, enhances fuel efficiency, and reduces downtime for long-haul, vocational, and regional fleets.

Overview of Volvo Fuel Injector 85013160

This Delphi EUI integrates high-pressure pumping and injection in one unit, with ECU-controlled solenoid timing for accurate delivery. It atomizes diesel effectively under demanding conditions, supporting clean burns and consistent performance.

A genuine or certified reman Volvo Fuel Injector 85013160 addresses wear-related issues like inconsistent spray and poor timing, safeguarding camshafts, rockers, and the fuel system in high-mileage heavy trucks.

Key Features and Benefits

• ECU-Precise Timing — Exact fuel quantity and injection timing for steady torque and power.
• Rugged EUI Build — Withstands vibration, heat, and heavy loads in truck applications.
• Emissions Support — Aids US07/US10 compliance with reduced particulates and NOx.
• Fuel Efficiency Recovery — Typically regains 4–8% economy over worn injectors.
• Smooth Operation — Cuts rough idle, misfires, black smoke, and engine vibration.
• Extended Durability — Frequently lasts 300,000–500,000+ miles with routine care.

Drivers and fleets often experience better pull, lower fuel costs, and fewer regen cycles after replacement.

Compatible Engines and Applications

The Volvo Fuel Injector 85013160 fits key Volvo and Mack engine families, including:

• D13 (13.0L inline-6) — Variants like D13F, D13H.
• MD13 (13.0L) — Medium- to heavy-duty configurations.
• D16 (16.0L inline-6) — Select models in heavy applications.
• Mack MP7 (11.0L–13.0L) — Compatible equivalents.
• Mack MP8 (13.0L) — Common in vocational and highway trucks.

Primary vehicle applications:

• Volvo VNL, VNM, FH, FM, FMX series trucks.
• Mack Granite (GU), Pinnacle (CXU), Anthem (CHU), CV713, GU713, CXU612/613.
• Trucks from 2007–2010+ eras with US07/US10 emissions.
• Medium to heavy-duty Volvo and Mack models for transport and construction.

Verify engine serial, emissions tier (e.g., US07/US10), and part supersessions for fit.

Warning Signs Indicating Replacement

Look for these failure symptoms:

• Heavy black smoke or excessive soot.
• Power loss on acceleration or under load.
• Rising fuel consumption.
• Rough idle, misfires, or uneven running.
• DTCs for injector deviation, timing, or pressure issues.

Replace early to prevent cam lobe damage or system contamination. Full-set replacement (6 injectors) ensures uniform performance.

Installation and Maintenance Tips

EUI service requires expertise:

1. Lock out/tag out and depressurize safely.
2. Install new O-rings, sleeves, washers, and seals.
3. Torque rockers and hold-downs to OEM specs.
4. Code injectors and run ECU adaptations.

Maintenance tips:

• Use ultra-low sulfur diesel with quality additives.
• Replace fuel filters per schedule (25,000–40,000 miles).
• Avoid contaminated fuel.
• Test injector balance/leak-down every 150,000–250,000 miles.

Choose genuine Volvo/Mack/Delphi or certified reman units (with warranties) for reliability.

Why Choose Volvo Fuel Injector 85013160?

This injector combines Delphi’s proven EUI technology with Volvo/Mack engineering, excelling in D13, D16, MP7, and MP8 applications for highway, regional, and vocational work. It offers dependable power, cost-effective operation, and emissions performance that maximize uptime.

Additional Information