Volvo Fuel Injector 85013159 for MD11 US 10

Description

Volvo Fuel Injector 85013159 for MD11 US 10

Brand: Mack, Renault, Volvo

Engine Type: MD11 US 10

Type: EUI

OEM Part Numbers: 21307001, 21457952, 85003664, 85013159

Manufacturer Part No.: BEBE4G03001

Manufacturer: Delphi

Warranty: 24 months without mileage limitation.

 

Volvo Fuel Injector 85013159: Genuine Delphi EUI Injector for Volvo D11, D13 & Mack MP7 Engines

The Volvo Fuel Injector 85013159 is an OEM electronic unit injector (EUI) produced by Delphi, built for heavy-duty Volvo and Mack diesel applications. Cross-referenced with part numbers like 21457952, 21307001, BEBE4G11001, 21599150, 22027807, 85013718, 85013719, 85143381, and reman equivalents such as EX631078, this injector provides accurate timed fuel delivery for efficient combustion in US07, EPA10, and related emissions standards.

Ideal for commercial fleets, the Volvo Fuel Injector 85013159 restores peak performance, improves fuel economy, and minimizes downtime in trucks facing tough highway and vocational demands.

Overview of Volvo Fuel Injector 85013159

This Delphi EUI combines integrated pumping and injection, with ECU solenoid control for precise quantity and timing. It handles high pressures and cycles effectively, ensuring fine atomization for clean, powerful burns.

A genuine or quality reman Volvo Fuel Injector 85013159 corrects wear-induced problems like uneven delivery, preventing cam lobe damage, rocker issues, and fuel system strain in high-mileage engines.

Key Features and Benefits

• Precise Electronic Control — ECU-managed timing for consistent torque and horsepower.
• Durable EUI Design — Robust build resists heat, vibration, and heavy-duty stress.
• Emissions Compliance — Supports US07/EPA10 standards with reduced particulates and NOx.
• Fuel Efficiency Gains — Recovers 4–8% economy versus degraded injectors.
• Smooth Performance — Eliminates rough idle, misfires, black smoke, and excessive noise.
• High Mileage Capability — Often achieves 300,000–500,000+ miles with proper maintenance.

Many operators report stronger acceleration, lower fuel burn, and reduced regen frequency post-installation.

Compatible Engines and Applications

The Volvo Fuel Injector 85013159 fits Volvo and Mack engine families, including:

• D11 / D11F / D11H (11.0L inline-6) — US07/EPA10 models.
• MD11 — Medium-duty variants.
• D13 / D13F / D13H (13.0L) — Select configurations.
• Mack MP7 (11.0L) — Equivalent heavy-duty engine.

Primary vehicle applications:

• Volvo VNL, VNM, VN, FH, FM series trucks.
• Mack Pinnacle (CXU), Granite (GU), Anthem (CHU), CV series.
• Trucks from 2007–2013+ with US07/EPA10 emissions packages.
• Vocational, regional haul, and long-haul setups.

Confirm engine serial, emissions level (e.g., US07/EPA10), and supersessions for exact fit. Note: Some flat-seal variants require full-set replacement.

Warning Signs Indicating Replacement

Common symptoms of failure:

• Black smoke or high exhaust soot.
• Power drop during acceleration or loaded operation.
• Increased fuel consumption.
• Rough idle, misfires, or cylinder imbalance.
• Check engine lights with injector-related DTCs.

Address promptly to avoid camshaft or fuel system damage. Replace injectors in full sets (usually 6) for balanced performance.

Installation and Maintenance Tips

Professional installation is required for EUI systems:

1. Depressurize and lock out the fuel system.
2. Replace O-rings, sleeves, washers, and seals.
3. Torque rockers and hold-downs to Volvo/Mack specs.
4. Perform injector coding/adaptations via diagnostic tool.

Maintenance recommendations:

• Use ultra-low sulfur diesel and approved additives.
• Change fuel filters every 25,000–40,000 miles.
• Avoid contaminated fuel sources.
• Test injector balance and leak-down around 150,000–250,000 miles.

Select genuine Volvo/Mack/Delphi or certified reman units (with warranties) for best results.

Why Choose Volvo Fuel Injector 85013159?

This injector merges Delphi’s EUI expertise with Volvo/Mack heavy-duty reliability, perfect for D11, MP7, and select D13 applications in trucking and construction. It delivers consistent power, fuel savings, and emissions control for maximum productivity.

Additional Information

Dimensions	30 × 8 × 8 cm
Weight	1.25 kg