Volvo Fuel Injector 85013147 for USA MD11 E3.3

Description

Volvo Fuel Injector 85013147 for USA MD11 E3.3

Brand: Renault, Volvo

Engine Type: USA MD11 E3.3

Type: EUI

OEM Part Numbers: 20965224, 21028628, 21106498, 21246331, 21457950, 85000836, 85000910, 85003110, 85013144, 85013145, 85013146, 85013147

Manufacturer Part No.: BEBE4F00001, BEBE4F00101, BEBE4F00102, BEBE4F03001, BEBE4F06001, BEBE4F11002, HRE361, HRE384

Manufacturer: Delphi

Warranty: 24 months without mileage limitation.

Volvo Fuel Injector 85013147: Genuine EUI Injector for Volvo D11F, D13F & Mack MP7 Engines

The Volvo Fuel Injector 85013147 is an authentic OEM electronic unit injector (EUI) developed for heavy-duty Volvo and Mack diesel engines. Cross-referenced with part numbers like 20965224, 21457950, 20833111, 85013146, EX631028, and Delphi BEBE4F06001 equivalents, this injector ensures precise timed fuel delivery for optimal combustion in EPA07 and US07 emissions-compliant applications.

Widely used in Volvo trucks, Mack trucks, and related heavy equipment, the Volvo Fuel Injector 85013147 delivers reliable power, fuel efficiency, and durability under demanding haulage conditions. Fleet managers and diesel technicians rely on it to restore performance and avoid costly engine issues.

Overview of Volvo Fuel Injector 85013147

This electronic unit injector (EUI) integrates high-pressure pumping and injection in one compact unit, controlled by the engine ECU for accurate timing and quantity. Built to Volvo’s rigorous standards, it handles extreme pressures and cycles while maintaining calibration for clean, efficient burns.

Replacing worn or faulty units with the Volvo Fuel Injector 85013147 eliminates common problems like misfires, power loss, and increased emissions, while supporting extended service life in commercial trucking.

Key Features and Benefits

• Precise Electronic Control — ECU-managed injection timing for consistent torque and horsepower.
• Robust EUI Design — Integrated pump-injector withstands high loads and thermal stress.
• Emissions Compliance — Supports EPA07/US07 standards with reduced particulates and NOx.
• Fuel Efficiency Gains — Restores 4–8% economy versus degraded injectors in heavy-duty use.
• Smooth Operation — Minimizes rough idling, hesitation, black smoke, and engine noise.
• High-Durability Performance — Often lasts 300,000–500,000+ miles with proper maintenance.

Operators frequently report stronger pull, lower fuel burn, and fewer regen cycles after installation.

Compatible Engines and Applications

The Volvo Fuel Injector 85013147 fits key Volvo and Mack engine families, including:

• D11F (11.0L inline-6) — EPA07 models, typically 325–405 hp.
• D13F (13.0L inline-6) — Select US07/EPA07 configurations.
• MD11 — Medium-duty variants in trucks and applications.
• Mack MP7 (11.0L) — Equivalent heavy-duty engine in Mack trucks.

Primary vehicle fits:

• Volvo VN, VHD, VNM series trucks (e.g., 2008–2010+ models with D11F).
• Mack Pinnacle, Granite, Anthem (CXU, CHU, GU series) with MP7.
• Select Volvo FM, FH trucks and construction equipment.
• Compatible with many EPA07/US07 emissions packages.

Confirm your engine serial number or emissions level (e.g., D11F EPA07) for exact match.

Warning Signs Indicating Replacement

Monitor these symptoms of injector failure:

• Excessive black smoke or high soot from exhaust.
• Noticeable loss of power under load or acceleration.
• Elevated fuel consumption.
• Rough idle, misfires, or uneven cylinder contribution.
• Check engine lights with injector or rail pressure codes.

Early action prevents damage to the camshaft, rocker arms, and fuel system. Replace injectors in full sets (usually 6) for balanced engine performance.

Installation and Maintenance Tips

Professional installation is critical for EUI systems:

1. Depressurize and follow lockout/tagout procedures.
2. Install new O-rings, sleeves, and seals (often included in kits).
3. Torque rocker arms and injector hold-downs to Volvo specs.
4. Perform injector coding/adaptations via diagnostic tool.

Maintenance recommendations:

• Use ultra-low sulfur diesel and quality additives.
• Replace fuel filters per Volvo schedule (typically 25,000–40,000 miles).
• Avoid contaminated fuel sources.
• Test injector balance and leak-down every 150,000–200,000 miles.

Choose genuine Volvo/Mack or certified remanufactured units (with warranties) for reliability.

Why Choose Volvo Fuel Injector 85013147?

This injector combines Volvo engineering precision with proven heavy-duty reliability, ideal for long-haul, vocational, and regional trucking. In Volvo D11F and Mack MP7 applications, it provides dependable power, reduced operating costs, and emissions control that keep vehicles on the road.

Additional Information