Volvo Fuel Injector 7421569200 for MD13 E3.27

Description

Volvo Fuel Injector 7421569200 for MD13 E3.27

Brand: Renault, Volvo

Engine Type: MD13 E3.27

Type: EUI

OEM Part Numbers: 21569200, 85013272, 7421569200, 7485013271

Manufacturer Part No.: BEBE4K01001, HRE367

Manufacturer: Delphi

Warranty: 24 months without mileage limitation.

 

Volvo Fuel Injector 7421569200: Genuine Delphi EUI Injector for Volvo MD13 & D13 Engines

The Volvo Fuel Injector 7421569200 is a high-performance OEM electronic unit injector (EUI) produced by Delphi, tailored for reliable diesel operation in Volvo heavy-duty applications. Cross-referenced as Delphi BEBE4K01001, Volvo 21569200, 85013271, Renault 7485013271, and equivalents like 85013228 or reman HRE367, this injector ensures precise fuel timing and delivery for efficient combustion in Euro 5 and similar emissions standards.

Widely fitted in Volvo trucks, FH/FM series, and related Renault models, the Volvo Fuel Injector 7421569200 boosts power, cuts fuel use, and maintains engine health in long-haul and distribution fleets.

Overview of Volvo Fuel Injector 7421569200

This Delphi EUI (Electronic Unit Injector) combines high-pressure pumping and injection in a single robust assembly, controlled electronically by the ECU for exact metering and timing. It supports common rail-like precision in unit injector systems, delivering fine atomization for clean burns and reduced emissions.

Installing a genuine or quality reman Volvo Fuel Injector 7421569200 fixes degraded performance, prevents cam and rocker damage, and restores smooth, powerful operation in high-cycle commercial engines.

Key Features and Benefits

• Accurate ECU Timing — Precise injection control for consistent torque and horsepower across rpm.
• Heavy-Duty Construction — Built to resist wear, heat, and vibration in truck environments.
• Emissions Optimization — Supports Euro 5 compliance with lower particulates and NOx.
• Fuel Savings — Recovers 4–8% efficiency versus worn injectors in real-world use.
• Smooth Running — Reduces rough idle, misfires, black smoke, and engine noise.
• Proven Durability — Often exceeds 300,000–500,000+ miles with maintenance.

Operators report enhanced acceleration, fewer issues, and noticeable cost reductions after replacement.

Compatible Engines and Applications

The Volvo Fuel Injector 7421569200 is primarily for Volvo MD13 and D13 series engines, including:

• MD13 (13.0L inline-6) — Medium-duty truck and excavator variants.
• D13 (13.0L inline-6) — FH/FM truck models, Euro 5 configurations.
• Cross-compatible with select Renault truck engines using the same Delphi EUI platform.

Main vehicle fits:

• Volvo FH series (heavy trucks, e.g., FH13).
• Volvo FM series (distribution and regional haulage).
• Volvo truck models from mid-2000s to early 2010s with MD13/D13 engines.
• Select Volvo excavators and Renault Trucks Premium/Magnum.

Confirm engine code (e.g., MD13 or D13 Euro 5) and serial for exact match.

Warning Signs Indicating Replacement

Common failure indicators:

• Excessive black smoke or soot from exhaust.
• Power loss during acceleration or under load.
• Higher fuel consumption.
• Rough idle, misfires, or uneven performance.
• Fault codes for injector timing, quantity, or pressure deviations.

Replace promptly to avoid camshaft lobe wear or fuel system contamination. Full set replacement (6 injectors) recommended for balanced cylinders.

Installation and Maintenance Tips

Professional service is essential for EUI systems:

1. Depressurize and lock out the fuel system.
2. Replace O-rings, sleeves, washers, and seals.
3. Torque rockers and hold-downs per Volvo specs.
4. Code injectors and perform ECU adaptations.

Maintenance advice:

• Use high-quality ultra-low sulfur diesel.
• Change fuel filters at recommended intervals (e.g., 30,000–50,000 miles).
• Avoid contaminated fuel.
• Test injector balance/leak-down periodically (150,000+ miles).

Genuine Delphi/Volvo or certified reman units (with warranties) provide optimal reliability.

Why Choose Volvo Fuel Injector 7421569200?

This injector blends Delphi precision with Volvo’s heavy-duty engineering, ideal for MD13 and D13 trucks in transport, construction, and logistics. It delivers dependable power, fuel efficiency, and emissions control for maximum uptime.

Additional Information

Dimensions	30 × 8 × 8 cm
Weight	1.25 kg