Volvo Fuel Injector 22052765 for MD13 US10

Description

Volvo Fuel Injector 22052765 for MD13 US10

Brand: Mack, Renault, Volvo

Engine Type: MD13 US10

Type: EUI

OEM Part Numbers: 22052765, 22340563

Manufacturer Part No.: BEBE4L07001, HRE372

Manufacturer: Delphi

Warranty: 24 months without mileage limitation.

 

Volvo Fuel Injector 22052765: Genuine Delphi EUI Injector for Volvo D13 & MD13 Engines

The Volvo Fuel Injector 22052765 is an OEM electronic unit injector (EUI) manufactured by Delphi, delivering precise timed fuel injection for heavy-duty Volvo diesel engines. Cross-referenced as Delphi BEBE4L07001 (or BEBE4G15001 variants), 22340652, 9022340652, VOE22052765, and reman equivalents like HRE372, this injector supports efficient combustion in US10/EPA10 and similar emissions packages.

Widely used in Volvo trucks, excavators, and wheel loaders, it restores power, improves fuel economy, and ensures durability in demanding construction, quarrying, and transport applications.

Overview of Volvo Fuel Injector 22052765

This Delphi EUI combines high-pressure pumping and injection in a single unit, with ECU-controlled solenoid for accurate timing and quantity. It atomizes diesel effectively for clean burns, reduced smoke, and optimal torque.

Replacing a worn Volvo Fuel Injector 22052765 corrects issues like uneven delivery and poor performance, preventing camshaft lobe wear, rocker damage, and fuel system contamination in high-cycle D13 engines.

Key Features and Benefits

• Precise ECU Control — Accurate injection timing for consistent horsepower and torque.
• Robust EUI Design — Built to endure vibration, heat, and heavy loads in industrial use.
• Emissions Compliance — Supports US10/EPA10 standards with lower particulates and NOx.
• Fuel Efficiency Gains — Recovers 4–8% economy versus degraded injectors.
• Smooth Operation — Eliminates rough idle, misfires, black smoke, and excessive noise.
• High Durability — Often lasts 300,000–500,000+ miles with routine maintenance.

Operators report stronger pull, reduced fuel burn, and fewer regen cycles after installation.

Compatible Engines and Applications

The Volvo Fuel Injector 22052765 fits Volvo D13 series engines, including:

• D13 / D13H (13.0L inline-6) — US10 configurations.
• MD13 / MD13C — Medium- to heavy-duty variants.

Primary applications:

• Volvo FH, FM series trucks.
• Volvo Construction Equipment: EC350E, EC380D, EC380E, EC480D, EC480E excavators.
• Volvo wheel loaders: L180H, L220H, L250H.
• Articulated haulers: A35F, A40 series.
• Other Volvo industrial and truck models from 2010–2014+ with D13/MD13 engines.

Verify engine serial, emissions tier (e.g., US10), and supersessions for exact fit.

Warning Signs Indicating Replacement

Common failure symptoms:

• Excessive black smoke or high soot output.
• Power loss under load or acceleration.
• Increased fuel consumption.
• Rough idle, misfires, or uneven performance.
• DTCs related to injector deviation, timing, or pressure.

Prompt replacement protects the cam, rockers, and fuel system. Replace injectors in full sets (6) for balanced cylinders.

Installation and Maintenance Tips

Professional service is essential:

1. Depressurize and lock out the system.
2. Replace O-rings, sleeves, washers, and seals.
3. Torque rockers and hold-downs to Volvo specs.
4. Code injectors and run adaptations via scan tool.

Maintenance best practices:

• Use ultra-low sulfur diesel with additives.
• Change fuel filters every 25,000–40,000 miles.
• Avoid contaminated fuel.
• Test injector balance/leak-down every 150,000–250,000 miles.

Genuine Delphi/Volvo or certified reman units (with warranties) ensure reliability.

Why Choose Volvo Fuel Injector 22052765?

This injector integrates Delphi’s EUI precision with Volvo’s heavy-duty engineering, excelling in D13/MD13 applications for excavators, loaders, and trucks. It provides dependable power, fuel savings, and emissions control for maximum uptime.

Additional Information

Dimensions	30 × 8 × 8 cm
Weight	1.25 kg